Aztec Bolting — When The Work Is CRITICAL
1-800-233-TORK (8675)
Hydraulic TX-Series
Low Clearance Head Systems
TorcUP TX Ratcheting Hex Link Wrench. When clearance is a problem, the TX wrench is the solution! Over the Nut, Behind the Nut, Between the Nut is where this tool will fit. Our patented "Peanut-Shaped Piston" design allows this tool to perform where others cannot! All you need is 3" above the nut, and we can apply 35,000 ft/lbs. of torque.
TX- 4's tight nose radius link provides torque in areas with overhead obstructions, behind the nut clearance problems and between nut restrictions.
TX Series Torque Wrench Features
- Lightweight - Lightweight Steel Mono-Body Enclosed Housing.
- Streamlined Engineering - Patented "Peanut Shaped Cylinder" makes this tool completely flat. Only One piece Drive Plate and Three Moving Parts for extremely easy maintenance.
- Fast Multi Tooth Ratchet System - With this non-locking ratchet system, you get 27 degrees nut rotation with each stroke making the TX series wrench faster than the competition.
- Versatile - 360 degree x 360 degree adjustable quick disconnect hose swivels and completely flat design. The TX series wrenches can adapt to overcome your tightest bolting obstructions.
- Durable - Steel Alignment Pin insures equal load displacement between side plates. Sliders prevent wear of piston or drive plate reducing costly repairs.
- Compact - One piece drive plate and "Peanut Shaped Cylinder" gives the TX series the smallest nose radius in the industry. We'll get into tight spaces and get you out of a jam.
- Accuracy/Repeatability - A Direct Drive mechanism is incorporated in each TX series wrench for accurate and repeatable torque traceable to NIST.
- Safety - The in-line reaction pad assures torsion free reaction every time without risk of twisting the tool.
- Duty-Cycle - The TX series tooling is capable of 100% duty cycle; at 100% torque 100% of the time. No Joke!
Click here for the TX Spec Sheet
 |
TX Low Clearance WrenchAztec is constantly looking for the latest advancements in torque tool design. The TX Series can get into the tightest of spots and is completely flat! With 5 different sizes from 192 ft/lbs to 35,650 ft/lbs. This BAD BOY can go where no others have gone before! |
 |
Extreme Accessibility!Only TorcUP TX-8 provides the power and ultra thin radius to fit this sub sea riser. No other wrench can match the performance and fit of a TX tool. |
 |
Three is faster than one!WOW! This TorcUP TX-4 is torqueing a horizontal casing split to 2,900 ft/lbs. Check out how easily the hoses are maneuvered using Multi-Axis swivels. |
 |
Squeezing Out the Competition!TorcUP TX Series can get you out of any tight jam. Boldly Torqueing where NO OTHERS have Torqued before! Want proof? Then ask for a demo TODAY! |
 |
Look Under the Hood !TorcUP is the only tool that has the confidence to show you what's underneath. You can't ask the competitor to do that without getting hit in the eye with flying parts. The MOST ADVANCED, MOST DEPENDABLE design Aztec has ever seen. And we've been doing this for 20 years. This is the future of torque told, and you can have it TODAY! |