AZTEC Series Tensioner Pump

MODEL AZ30K

Especially designed for the most advanced tensioning systems, inland or offshore. The AZ30K completes the job with critical accuracy. Completely portable and accommodates to 30,000 PSI.

• Double-Ended
• 2.5 Gallon Oil Reservoir
• Air Filter Regulator With Gauge
• Diaphragm Pump
• Air Filter & Lubricator
• Oil Level Sight Gauge
• Pressure Control Valve

• Products
• Torque Wrenches
  • Hydraulic
    • TU Square Drive Series
      • TU Series Spec Sheet
    • TX Low Profile Series
      • TX Series Spec Sheet
    • Operating Instructions
      • TX Series (PDF)
      • TU Series (PDF)
  • Pneumatic
    • Norbar
      • PT52mm > 1000nm (PDF)
      • PT72mm > 2000nm (PDF)
      • PT Small Diameter
        Series > 5500nm (PDF)
      • PT Standard Series
        > 100,000nm (PDF)
      • PT Series Accessories (PDF)
    • Aimco Stall Type/Low Torque Inpulse Tools
  • Manual
    • Torque Multipliers
      • 3400 ft/lbs (PDF)
      • Small Diameter
        3400 ft/lbs (PDF)
      • Standard Diameter
        35000 ft/lbs (PDF)
      • Proto-Sweeney - X-4
    • Torque Wrenches
      • Norbar
        • ProWrench Model 5 > 5nm (PDF)
        • ProWrench Model
          400 > 400nm (PDF)
        • ProWrench Handles & Presets > 400nm (PDF)
        • ProWrench Model
          1500 > 1500nm (PDF)
        • Industrial Torque
          Wrench > 1500nm (PDF)
      • CDI
        • Micro Adjustment Wrenches (PDF)
        • Dial Type Torque Wrenches (PDF)
        • PreSet Wrenches (PDF)
        • Computorq3 (PDF)
      • Stahlwille
• Hydraulic Tensioners
  • Tensioner Spec Sheet
  • Tensioner Pump
• Hydraulic Power Consoles
  • Air/Hydraulic AHC10A55 (PDF)
  • Electric/Hydraulic AHC10E55 (PDF)
  • Operating Instructions (Generic) (PDF)
    • Air
    • Electric
• Calibration/Electronics Equipment
  • Hand Torque Testers (Digital)
    • CDI - Hand Torque Testers (PDF)
    • Norbar True Check (PDF)
    • Norbar Static Tester (PDF)
    • Norbar Torque Tester (PDF)
    • Norbar Screwdriver Tester (PDF)
    • Norbar TTT Display (PDF)
  • Electric/Pneumatic Rundown (Digital)
    • AWS - Dynamic Type - Simulated Joint 5000ft/lb capacity (PDF)
  • Skidmore - Analog Type
  • Test Display - Digital
    • Norbar TTT Torque Tool Tester (PDF)
  • Transducers
    • Static (PDF)
    • Annular
      • Norbar Rotary Transducers (PDF)
      • Norbar Annular Transducers for 72mm, Small Diameter and Standard Series gearbox (PDF)
  • Electronic Torque Control - Pneumatic Torque Tools
    • Auto Shutoff FRL (PDF)
  • Aztech Digital Pressure Gauge
    • Multi-Programmable Guage (PDF)
• Specialty Tooling & Accessories
• Flange Tools
  • Alignment Tools
    • Hand Alignment (PDF)
    • Flange Alignment 3TM (PDF)
    • Flange Alignment 5TM (PDF)
  • Flange Spreaders
    • 8 Ton Mechanical Wedge
    • 10 Ton Hydraulic Wedge
    • 10 Ton Integral Wedge
• Nutsplitters
• Stud Removal Tools
• Impact Sockets
• Skidmore - Analog Type Test Stands
• Technical Support
• Stud/Bolt Generic Torque Values
  • 50% to 100% (PDF)
• Bolting Procedures
  • Torque (PDF)
  • Tension (PDF)
  • Bolt Sequences
    • 12, 16, 20, and 24 Bolt Flanges (PDF)
    • 28, 30, 32, 36, and 44 Bolt Flanges (PDF)
    • 48 - 80
  • Pipe Flange Bolting Guide (PDF)
• Hydraulic Torque Wrenches
  • Pressure to Torque Conversion
    • TX Series (PDF)
    • TU Series (PDF)
• Hydraulic Power Consoles
  • Tech/Parts Manuals
• Stud Removal Tools
  • Operating Instructions
• Hydraulic Nutsplitters
  • Operating Instructions
• Flange Spreaders & Wedges
  • Operating Instructions

520 Dallas St. League City, Texas 77573 | Phone: (281) 338-2112 | Fax: (281) 332-1780 | Toll Free: 1-800-233-TORK (8675)