Manual Torque Multipliers
Shown from left to right: E291, E393, E494Typical Torque Multiplier Applications
- Locomotives
- Power plants
- Pulp and paper mills
- Refineries
- Chemical plants
- Mining and construction
- Off-road equipment
- Shipyards
- Cranes
Select the right torque
Allow 2x tightening torque to break out bolts. Rusted, corroded nuts and bolts may require two times the original torque to break loose.
Accurate, Efficient Torque Multiplication
- High-efficiency planetary gear sets achieve high output
torque from low input torque
- Most models operator protected by anti-backlash device
- Multiplier output accuracy ± 5% of input torque
- Reversible, tighten or loosen bolts
- Reaction bar or reaction plate type
- Angle-of-turn protractor standard on E300 models
- Reaction plate models offer increased versatility with reaction point locations
- E300 and E400 series replaceable shear drives provide overload protection of internal power train (one replacement shear drive is included)
Selection Chart
| Torque Multiplier Type |
Output Torque Capacity |
| (Ft.lbs) |
(Nm) |
| Model Number |
| Reaction
Bar
Multiplier |
| 750 |
1015 |
| 1000 |
1355 |
| 1200 |
1625 |
| 2200 |
2980 |
| 3200 |
4340 |
|
| E290PLUS |
| E291 |
| E391 |
| E392 |
| E393 |
|
| Reaction
Plate
Multiplier |
| 2200 |
2980 |
| 3200 |
4340 |
| 5000 |
6780 |
| 8000 |
10845 |
|
|
For more information on Manual Torque Multipliers please contact a representative