1-800-233-TORK (8675)

Double-Acting Hydraulic Hexagon Torque Wrenches

Shown: W - Series

Maximum Torque at 10,000 psi:
15,000 Ft.lbs

Hexagon Range:
11/4 -45/8 inches

Nose Radius:
1.22-3.44 inches

Maximum Operating Pressure:
10,000 psi

Typical Torque Multiplier Applications

Allow 2x tightening torque to break out bolts. Rusted, corroded nuts and bolts may require two times the original torque to break loose.

Rigid steel wrenches with low profile interchangeable hexagon cassettes guarantee durability and maximum versatility in bolting applications.

High-efficiency planetary gear sets achieve high output torque from low input torque
Most models operator protected by anti-backlash device
Multiplier output accuracy ± 5% of input torque
Reversible, tighten or loosen bolts
Reaction bar or reaction plate type
Angle-of-turn protractor standard on E300 models
Reaction plate models offer increased versatility with reaction point locations
E300 and E400 series replaceable shear drives provide overload protection of internal power train (one replacement shear drive is included)

Interchangeable Cassette Selection

Hexagon Range		Maximum Torque 1) at 10,000 psi	Drive Unit Model Number	Minimum Torque (ft. lbs)	Dimensions (in)						Weight Drive unit without hexagon cassette (lbs)
(in)	(mm)	(ft. lbs)	Drive Unit Model Number	Minimum Torque (ft. lbs)	A	B	C	D	E	F	Weight Drive unit without hexagon cassette (lbs)
1 7/16 - 2 3/8	36 - 55	2000	W2000	200	4.29	5.55	5.83	1.26	.94	.79	3.09
1 5/8 - 3 1/8	55 - 80	4000	W4000	400	5.35	6.57	7.01	1.61	1.29	.79	4.41
2 3/16 - 3 7/8	70 - 95	8000	W8000	800	6.77	8.07	8.19	2.07	1.65	.98	6.61
2 9/16 - 5	80 - 115	15,000	W15000	1500	8.15	9.45	9.96	2.48	1.97	.79	11.02

For more information on Hexagon Torque Wrenches please contact a representative