Aztec Bolting — When The Work Is CRITICAL
1-800-233-TORK (8675)
Flange Alignment Tools
Bolt Hole Range:
11/16 - 2 1/8 inches
11/16 - 2 1/8 inches
Flange Wall Thickness:
11/16 - 8 inches
11/16 - 8 inches
Maximum Force:
0.3 - 5 tons
0.3 - 5 tons
Adjustable Reach-on ATM-3
The highly adjustable reach of the wing, the reversable lift hook and manual torque wrench TW-22 (3/8" drive) allow precise alignment.ATM Series
- Rectifies twist and rotational misalignment without additional stress in pipe lines
- For most commonly used ANSI, API, BS and DIN flanges
- No slings, hooks, or lifting gear. Extremely safe, high precision
- ATM-1 supplied with three bushings for different bolt hole sizes. Can be used in reversed position
- Can be installed and used in any position and any location
- Stays stable in position under full load
ATM-5 Including Hydraulics
Including 10,000 psi hydraulics: RC-53 singleacting cylinder, P-142 twospeed hand pump and 6 ft. long safety hose (HC-7206C).
| Maximum Lifting Force (ton) | Model Number | Bolt Hole Range | Flange Wall Thickness | Wt. | |||
| (in) | (mm) | (in) | (mm) | (lbs) | |||
| 0.3 | ATM-1 | 11/16 - 1 1/8 | 17 - 27,2 | 11/16 - 1 1/8 | 17 - 50 | 4.4 | |
| 3.3 | ATM-3 | 1-2 1/8 | 25 - 54 | 1 3/16 - 4 1/2 | 30 - 115 | 21.4 | |
| 5.5 | ATM-5 * | ≥ 1 1/4 | 14 - 24 | 3 1/8 - 8 | 80 - 203 | 35.7 | |
For more information on Flange Alignment Tools please contact a representative