Computorq3 Electronic Torque Wrench
The COMPUTORQ3 Electronic Torque Wrench
is a simple to use digital readout wrench that
displays real time torque values in any of four
torque units, ft.lbs., in.lbs., Nm, kg.cm.
Simply set the desired torque value and apply
force until the green LED illuminates. Great
for light industrial, automotive, motorcycle,
watercraft and aircraft applications.
Download PDF Spec Sheet
- Sleek New Design
- 15-Degree Flex Ratcheting Head
- Push Button Socket Release Head
- Large, Easy to Read Digital Display
- Long Battery Life, Uses 2 Each CR123 Lithium Batteries
- Ergonomically Designed Molded Nom-Slip Rubber Grip
- Torques in Both Clockwise and Counterclockwise Directions
- Battery Saving Auto-Shutoff After Two Minutes
- COMPUTORQ3 Remembers Last Unit and Torque Setting Selected
- Audible Tone Sounds when Set Torque Value is Reached, if the Set
Torque Value is Exceeded, an Alarm Tone will Sound.
- 3 Color LED Light Bar
YELLOW LED Indicates Approaching Desired Torque Setting
GREEN LED Indicates Desired Torque Value is Reached
RED LED Indicates Fastener was Overtorqued, Loosen and Retighten.
- When Desired Torque Value is Reached, Display will Hold Value and
Flash for Ten Seconds.
- COMPUTORQ3 will Operate in any of Four Torque Units, Foot Pounds
(Ft. Lbs.), Inch Pounds (In. Lbs.), Newton Meter (NM) or Kilogram
Centimeter (Kg. CM.).
- ACCURACY: ± 2% CW of Readings from 20% to 100% of Full Scale
± 3% CCW of Readings from 20% to 100% of Full Scale
- N.I.S.T. Traceable Certificate of Calibration Included
